Loading ...
Loading ...
Loading ...
Review this chart to find do-it-yourself solutions for minor performance problems, Any ser-
vice needed, other than those described in this owner's manual, should be performed by
an authorized service representative,,
i Disconnect_ or cleaning the unit.
Failure to do so could result in electrical shock or personal injury.
i,i1,1 iiiijl1,1111 I I .......................
Cleaner won't run.
Poor job of dirt
pick-up.
Cleaner picks up
moveable rugs or
pushes too hard°
1o Unplugged at wall outlet
2o Tripped circuit breakertbiown fuse
at household service panel
3o ON/OFF switch not turned ON
I. Full or clogged dust bag
2. Wrong pile height setting
3. Worn agitator,.
4. Clogged nozzle or dirt tube
5. Clogged hose
6. Hole in hose,
7. Brokenlmisplaced belt
8. Hose not inserted fuIly
9,,
10.
2_
3.
Motor protection system activated,r 9o
Dirty filters 10_
1o Wrong pile height setting
Ptug in firmly, push ON/OFF switch to
ON,
Reset circuit breaker or replace fuse,
Push ON/OFF switch toON
1. Change dust bag, (page 13)
2. Adjust setting, (page 7)
3= Replace agitator, (page 2t).
4,, Clean nozzle area, (page 19)
5, Check for clogs, (page 19)
6. Replace hose
7, Replacelfix be{t, (page 17),
8, Insert hose fully, (page 10),
Check for clogs, (page t9)
Clean filters, (pages 14-15)
1. Adjust setting, (page 7)
Light won't work° Burned out light butb Change light bulb, (page 20)
Agitator does not
turn°
Broken belt
Bare floor selector in bare
floor setting,
Belt installed incorrectly
1.
1o
2o
3.
1, Full or clogged dust bag,
2. Dirty filters
3o Clogged airflow passage -
dirt tube, nozzle, hose
4o Certain attachment tools,
t, Attachment use restricts
air flow,
2. New carpet fuzz clogged air path
Belt rubbing on carpet/bare floor
selector shaft
I,,
2,
3.
1,,
Performance indicator,
some models, is red.
Air flow restricted
with attachment use.
Sound changes°
Excessive noise as
vacuum is shut off,
Repface beit, (page 16)
Switch selector to the carpet setting,
(page 7)
Check BELT CHANGING AND
AGITATOR CLEANING, (page 17).
1. Change dust bag, (page 13)
2. Clean filters, (pages 14-15),
3. Clear clog from airflow passage,
(page 19),
4. Should return to normal when
tool is removed
1. Check ATTACHMENTS,
(page 8),
2. Check CLOG REMOVAL and clean
hose, (page 19)
1. Push selector all the way forward
22