Loading ...
Loading ...
Loading ...
.
2.
Press CANCEL/DRAIN. The Cancel/Drain light will light up.
The dishwasher starts a 2-minute drain (if needed). Let the dishwasher drain completely. The light turns off after
2 minutes. The door must be closed for the dishwasher to drain.
Youcan interrupt a cycle and restart your dishwasher from the beginning using the following procedure.
1. Open the door slightly to stop the cycle. Wait for the spraying action to stop then open the door completely.
2. Check that detergent dispenser cover is still closed. If cover is open, you will need to refill the detergent dispenser
before restarting your new cycle.
3. Press CANCEL!DRAIN twice to reset the control.
4. Select new cycles and options.
5. Firmly close the door and press START/RESUME.
1. Open the door slightly to stop the cycle. Wait for the spraying action to stop, then open the door completely.
2. Check whether the detergent dispenser cover is still closed. If it is open, the wash cycle has already started and
adding a dish is not recommended.
3. If detergent has not yet been used (detergent dispenser cover is closed), you may add a dish.
4. Firmly close the door and press START/RESUME.
Hot water dissolves and activates the dishwasher detergent. Hot water also dissolves grease on dishes and helps glasses dry spot-free.
For best dishwashing results, water should be 120°F (49°C)as it enters the dishwasher. Loads may not wash as well if the water
temperature is too low.
Additional efficiency tips
• To save water, energy and time, only scrape dishes. Do not rinse dishes before putting them into the dishwasher.
• Use a delay feature to run your dishwasher during off-peak hours. Local utility providers recommend avoiding heavy
usage of energy at certain times of day.
• During the summer, run your dishwasher at night. This reduces daytime heat buildup in the kitchen.
• Use a rinse aid to improve drying.
16
Loading ...
Loading ...
Loading ...