Loading ...
Loading ...
Loading ...
12
-
To prevent foul odor clean the detachable cover, after the rice cooker has cooled and the rice cooker is unplugged
-Body and cover should be cleaned with a dry dish towel. Do not use betel while using rice cooker, starch
can remain. No effect on health.
-Do not put materials like screws into holes of detachable cover. Check the back cover and front cover.
After cleaning detachable cover, put it back on the lid
Unless detachable cover is mounted, preset cooking cannot be done. (Alarm may sound while keeping warm.)
Please fir a rubber packing into the cover plate completely after washing or replacing the rubber packing.
1. Handle must be located at “Lock” during Cooking.
The lamp turning on means the top cover is closed perfectly,
so you can cook.
2. After cooking, the handle must be turned from “Lock” to
“Unlock”, and then push clamp knob to open.
It is hard to open when there is remaining steam in the
Inner pot. At the time, twist pressure weight and let the
steam out. Do not open by force.
3. Handle must be located at “Unlock” when open and close.
·If the lamp does not turn on, it would not
operate “Cook” and “Preset” buttons.
Make sure the handle is located at “Lock”
CLEAN STEAM VENT
AND SAFETY PACKING
INNER POT MAIN UNIT INNER BODY
Turn the holder counter clock wise,
and the cover will be easily separated
from the cooker and can be washed.
①
To separate the rubber packing,
please pull it out from the cover
plate as shown in the picture.
Make sure to clean the clean steam
went after/before use. Do not try to pull
out the clean steam went and safety
packing, clean it with care. Make sure
the clean steam went and safety
packing are installed completely
after/before use. If the steam vent is
detached, or not attached completely,
please contact customer service.
Wipe the inner, upper, and outer of the
inner pot of any external substances.
Do not use touch scrubber, brush,
abrasive material etc.
※Maintaining a rubber packing cleanly
will let the rice cooker last longer.
Wipe the main unit with a wet cloth
that has been extracted out of all
water
Make sure to clean the steam
control went before and after use.
①
To put back the rubber packing,
please fit it to each of 6 projections
and holes as shown in the picture.
②
After fitting 6 projections to the
holes, please press the rubber
packing around the corner
completely as shown in the picture.
③
Please check that the rubber packing fits into the cover
plate completely. If not, steam may be released from the
crack between the packing and the plate.
④
②④⑤
③
Wash the cover with cooking purpose
neutral detergent and sponge frequently,
and wipe off moisture with handkerchief.
Please keep clean the edge of rubber
packing, then the rice cooker last's
longer.
When mounting the cover, grab
separate cover handle, attach it to
hole, and after adjusting holder on top
of packing stop tab, fix it by turning it
clockwise.
It is easier to attach the cover holder
when the power part of the detachable
cover is pressed.
HOW TO CLEAN
Plated inner pot with titanium ion (The outside)
How to use handle
12
Loading ...
Loading ...
Loading ...