Loading ...
Loading ...
Loading ...
6 | P a g e
3. INSTALLATION
For safe proper operation, follow the manufacturers instructions reported in this section.
3.1 POSITIONING
IMPORTANT NOTE: Coolers that have been tilted MUST remain in the upright position for 24
hours prior to plugging in the cooler, the cooler is built in style so can go under benches, front
grill must be clear. Keep away from heat sources, such as radiators or air conditioning pipes.
Allow free air circulation to the refrigerator unit if you have option, this can help lessen run
times.
The installation instructions furnished with the device indicate a clearance of min 10mm at
top, 100mm at the rear and min 10mm at each side.
Do not place unit in sunlight or behind a cupboard door.
The ambient temperature must not be higher than 43°C for optimal performance.
The shelf can withstand the maximum load 50kg (all glass bottles)
3.1.1 COOLER LEVELLING
To provide the best performance the cooler must remain level.
3.2 ELECTRICAL CONNECTION
Warning: Do not use extension cords
The cooler works on single-phase voltage (220-240V/50Hz) power supply. To switch on the
cooler, insert the plug into the outlet.
Ensure that: .
When the cooler is operating, check that the supply voltage is not dropping or increasing
under/over +10% the rated voltage (195 Volts to 253 Volts)
*Ensure the cooler is connected to correct voltage prior to plugging it in; there is a
description to identify the correct voltage on rear of the cooler.
*The vent should not be blocked when fridge is working (front Grill).
*Avoid any water dropping or leaking into, or on top of the cooler. It could cause damage to
the internal workings and is potentially dangerous.
*Danger-Risk of fire or explosion. Flammable refrigerant used. Do not use mechanical
devices to defrost refrigerator. Do not puncture refrigerant tubing.
*Danger-Risk of fire or explosion. Flammable refrigerant used. To be repaired only by
trained service personnel. Do not puncture refrigerant tubing. Consult repair manual/owner's
guide before attempting to service this product. All safety precautions must be followed.
The manufacturer is not responsible for damages or accidents arising from the misuse or
disregard of electrical laws relevant to the country where the cooler is used.
Loading ...
Loading ...
Loading ...