Loading ...
Loading ...
Loading ...
Before you clean
1. Move furniture to another area if cleaning
an entire room (optional).
2. Pick up all loose dirt, debris, and pet hair
before deep cleaning. It is recommended that
you vacuum the area prior to deep cleaning.
3. Plan your cleaning route to leave an exit
path. It is best to begin cleaning in the corner
farthest from your exit.
4. Pretreating (optional) is recommended to
improve cleaning effectiveness for heavily soiled
carpet in high traffic areas such as entryways
and hallways.
BISSELL Stain Pretreat
a. Spray the BISSELL Stain Pretreat formula
onto heavy traffic areas, soiled areas, or
stains.
b. Allow to penetrate for at least 3 minutes.
c. Clean as normal following the instructions
on the next page.
Machine Prep
1. Fill the 2-in-1 Water Tank. Remove the tank
from the base of the machine by lifting up the
tank carry handle. Carry like a bucket to the sink.
2. Unlatch the top of the tank from the bottom
by lifting up on the tank latches on either
side of the tank.
3. Pour 5 ounces of formula into the heavy duty
bladder (fill the included measuring cup twice).
Fill the rest of the heavy duty bladder with hot
(140°F/60°C MAX) tap water. DO NOT BOIL OR
MICROWAVE WATER.
NOTE: Always use genuine BISSELL 2X
formulas to maximize cleaning and for the
safety of your machine.
4. Place the top of the tank back on the
bottom and secure the latches on both sides.
NOTE: Remember to secure the tank latches
on either side of the tank and test to make sure
they are secure before picking up the tank.
ATTENTION
SomeBerbercarpetshaveatendencytofuzz
withwear.Repeatedstrokesinthesamearea
withanordinaryvacuumordeepcleaner
mayaggravatethiscondition.PleaseseeStain
Removalinstructionsonpagelb
2.
3. 4.
/ WARNING
Toreducetheriskoffireandelectricshock
duetointernalcomponentdamage,use
onlyBISSELLcleaningfluidsintendedforuse
withthedeepcleaner.
www.BISSELL._
Loading ...
Loading ...
Loading ...