Loading ...
Loading ...
Loading ...
Door Removal Instructions
Ir _ottom
,i._de
Screw C_nter "_'-'se
Tools Necessary:
Ph Ilior
_na
Flat Head
Screw Driver
Adlustable
wrY,rich
3/8
Fixed
Wrench
_Top Hinge
Cove[
_Pin
Center
Hinge
DOOR REMOVAL INSTRUCTIONS:
[ your refrigerator wi not fit through an entrance area. you can reduce its size by
removing the doors. Check first by measuring the entrance.
iMPORTANT: Before you begin, turn the refrigerator temperature control to "0" and
remove the electrical power cordfrom the wall outlet. Remove food from door shelves.
1 Disconnect electrical supply
2 Remove toe grille/see page 4 to barn how,
To remove freezer doer:
1 Remove top hinge cover and screws.
2 Trace around the hinge with a soft lead pencil. This makes reinstaiiation easier
3 Remove top hinge and lift door off bottom hinge pin.
4 Reverse this procedure to reinstall freezer door.
To remove refrigerator door:
1 Place wood block under door to support its weight.
2 Unfasten the multi-wire cable bracket by removing its screw from the cabinet.
8, Detach the multi-wire cable connector located belos the door.
Place your thumbs on fiat sides of each connector, grasp firmly, and bend both
ends back and forth while pulling apart,
NOTE: You may need to insert a fiat screwdriver between the connector ends to
release the locking tab (see illustration).
4, Detach the water tube from the connector located below the door. The connector
releases when you press its outer sleeve inward.
NOTE: If refrigerator has been used. have a container ready to catch excess water
from tube.
5 Remove the bottom hinge screws and hinge, holding the door as its weight rests
on the wood block. Lay the door on its side to avoid damage to cable and tube.
6 Remove the center hinge screws and hinge. Ensure plastic washer stays on
7, Reverse this procedure to reinstall refrigerator door. When both doors are
reinstalled, connect water line by inserting tube and pushing until mark touches
face of fitting, Connect cable, replace toe grille, and plug in electrical power cord.
Fiat Head
Screwdriver
TO DISCONNECT
1.Press outer ring againstface
removeIUDe
susn until mark touches face of fitting
Loading ...
Loading ...
Loading ...