Loading ...
Loading ...
Loading ...
Note:
Prior to assembly remove protective film from stainless steel parts
Fig. 1
Wheel Channel
Cart Assembly, Door Stops & Door Pivot Bolts
1. Attach the two L-shaped sides to the back portion
of the cart, making sure the two holes face up &
the key holes are on the top, using the (4) self
tapping hex head screws. (See Fig. 1)
Note: A power screwdriver is required to install the
screws-be cautious not to over-tighten and strip
the screws.
.
Set the base on the top of the cart assembly, with
large opening closer to back portion of cart, and
align the eight mounting holes. Then set the 2
wheel channels on the base and attach them using
the (8) bolts provided, from inside the cart
upwards through wheel channels. (See Fig. 2)
Note: Tighten the bolts securely
3. Door Stops: Insert Door Stop Bolts downward
from bottom side of Cart Base through the hole
found in the middle/front of the base. (See Fig 3)
.
Screw Rubber Caps onto Bolts from the topside of
Cart Base and tighten securely. (See Fig 4)
. Door Pivot Bolts: Insert Bolts downward from
bottom side of Cart Base through the holes found
in the left & right/front of the base and secure with
bolt. (See Fig. 2)
Fig. 4
Fig. 2
Fig. 3
Loading ...
Loading ...
Loading ...