Loading ...
Loading ...
Loading ...
TO REMOVE BLOWER CHUTE
1. Graspblowerchute with one handand pull lock rod on mounting
bracketwith otherhand towardengine to release.Referto Figure7.
2. Removeblowerchutefrom overthe rim of the dischargeopening.
USING THE NOZZLE VACUUM
1. Placenozzle/hosevacleverin the top positionon the nozzleto
vacuumthroughnozzle.See Figure13.
2. Thespring loadedpinmustbe in the first hole (closestto the end of
the tube)of the hoseadapterto operatethe nozzlevac.
3. Placebothhandsontop of the upper handleand fully lift the drive
controlagainstthe upperhandleto propelthe unitoveryard.
4. Usethespeedcontrolto chooseeitherthe highor low speed.The
speedcontrolmaybe movedeitherwhilethe unit is propellingor
beforeengagingthe wheels.
IMPORTANT:Movethe speedcontrolonlywhenthe engine is running.
Changingthe speedcontrolsettingwith the engineoff candamagethe
yardvacuum.
Yardwastesuchas leavesandpine needlescan be vacuumedup
throughthe nozzlefor shredding.After materialhasbeenshredded
by theflail bladesonthe impellerassembly,it will bedischarged
intocatcherbagor throughblowerchute.Do notattemptto shredor
chipany materialother thanvegetationfoundin a normalyard (i.e.
branches,leaves,twigs,etc.) Avoidfibrousplants suchas tomato
vinesuntilthey are thoroughlydriedout. Materialssuchas stalksor
heavybranchesupto 1-1/2"indiametermay be fed intothe chipper
chute.
,_ WARNING:Do not attempt to shred, chip, or vacuum
any material largerthan specifiedon the machine
or inthis manual.Personalinjuryor damageto the
machine could result.
IMPORTANT:Theflail screenis locatedinsidethe housingin the
dischargearea.If the flailscreen becomesclogged,removeand clean
as instructedin the Service&Adjustmentssectionon page 17.For
bestperformance,it is alsoimportantto keepthe chipperbladesharp.
_ WARNING:Do not at anytime makeany
adjustments without first stopping engineand
disconnecting sparkplugwire.
f Nozzle/Hose Hose
VacLever
(Top Positi
Nozzle
Spring Loaded Pi
(First Hole)
Figure 13
J
f
Nozzle/Hose
Vac Lever
(Bottom Po
Spring Loaded Pin
(Second Hole)
Figure 14
J
USING THE HOSE ASSEMBLY
1. Placenozzle/hosevachandlein the bottompositionon the nozzle
to redirectvacuumto the hoseassembly.SeeFigure14.
2. Thespring loadedpinmustbe in the secondhole of the hose
adapterto operatethe hoseassembly.
3. Unhookthe hosefromupperhandlebracketand graspthe hose
handleto guidewhilevacuumingyardwastesuchas leavesor pine
needlesin hard to reachplaces.
13
Loading ...
Loading ...
Loading ...