Loading ...
Loading ...
Loading ...
5. Position the fabric so that the needle is
2mm (1/16 inch) in front of the area to be
darned, and then lower the presser foot
lever.
i_i__:_Please Note: When lowering the
presser foot, do not push //7the front of
the presser foot, otherwise the darning
will not be sewn with the correct size.
6. Pass the upper thread down through the
hole in the presser foot. Pull down the
buttonhole lever then push it back. The
buttonhole lever is positioned behind the
bracket on the buttonhole foot. Gently hold
the end of the upper thread in your left
hand, and then start sewing.
n_mn_
liml_
HmH
HmH
IVY_
Please Note: When you select any
buttonhole pattern or darning pattern,
LCO screen will be demonstrated the
warning animation message display, it
is to remind you to lower the buttonhole
lever.
7. Darning stitches are sewn from the front of
the presser foot to the back, as shown.
8. If the sewing range is too big to sew, then
we suggest you can sew several times (or
cross sew) to get better sewing result.
42
Loading ...
Loading ...
Loading ...