Loading ...
Loading ...
Loading ...
5
3. Rotate the locking wheel clockwise until secure.
4. Position the microphone with its controls facing up.
Snap the microphone into the clip at the midpoint of the
microphone, making sure it’s well balanced in the clip. If
necessary, use a slotted screwdriver to tighten the bolt on
the clip.
Tip: You can adjust the angle of the shoe-mount microphone
clip to tilt the microphone up or down.
Boom Pole and Mic Stand
You can mount the SCL-1080 onto a boom pole, microphone
stand, or tripod via the boom-pole microphone clip.
The boom-pole/handheld clip has a 5/8-27 socket that’s
compatible with most mic stands. To attach the clip to a
boom pole or tripod with a 3/8-16 post, screw the included
reducer bushing into the clip’s socket. To make sure it’s fully
inserted, use a coin or a slotted screwdriver to tighten the
bushing until secure.
Make sure the SCL-1080 is tuned off, and follow these steps:
1. Screw the clip onto the boom pole or mic stand until
secure.
2. Make sure the microphone and the handgrip on the clip
are facing forward and position the microphone with its
controls facing up.
3. Snap the microphone into the clip at the midpoint of the
microphone, making sure it’s well balanced on the clip. If
necessary, use a coin or a slotted screwdriver to tighten
the bolt on the clip.
Tip: You can adjust the angle of the shoe-mount microphone
clip to tilt the microphone up or down.
Loading ...
Loading ...
Loading ...