Loading ...
Loading ...
Loading ...
CONTROL PANEL AND FEATURES
Not all features and cycles are available on all models.
NOTE: The control panel features a sensitive surface that
responds to a light touch of your finger. To ensure your selections
are registered, touch the control panel with your finger tip, not
your fingernail. When selecting a setting or option, simply touch
its name.
Model WFW8640B*0
NORMAL
COLD WASH ---o WHITES
DELICATES HEA_fY
DUTY
QUICK
WASH TOWELS
DRAIN -- SANITIZ
& SPIN
e i-,
_ Door Locked _ Add Garment _ Steaming d_ Done
_%_ Set,sing _¢_ TumbeFresh
Ex[[a Fast xtra Heavy
Fast Heavy
SJo'w Light Off
CLEAN WASt4ERwth aft[85h
.....I .... J .... I I
CeaM:o:st Extra Rinse TumbleFresh Cycle Signal Control Lock
wtl_ s _(,8_ T} Rod s second Hold 3 seconds
for Baton Sou<ds
POWER
Touch to turn the washer on and off. Touch to stop/cancel
a cycle at any time.
WASH CYCLE KNOB
Use your Wash Cycle knob to select available cycles on your
washer. Turn the knob to select a cycle for your laundry load.
An LED will light up for the cycle selected.
NOTE: The Clean Washer LED will flash when the washer
has run 30 wash cycles as a reminder to run the Clean
Washer cycle.
See "Cycle Guide" for detailed descriptions of cycles.
_ START
Touch and hold until the light above START comes on to
start a cycle, or touch once while a cycle is in process to
pause it. If you want to add a garment, you can touch START
when the "Add Garment" LED is on.
O
O
DELAY WASH
Use + and - to delay the start of the wash cycle by up to
8 hours. To turn off Delay Wash, use + and - to set the delay
time to "0," or touch POWER.
LED DISPLAY AND SETTINGS
When you select a cycle, its default settings will light up and
the Estimated Time Remaining will be displayed. Factors
such as load size, wash temperature, and water pressure
may affect the time shown in the display during the cycle.
Tightly packing garments, unbalanced loads, or excessive
suds may cause the washer to adjust the cycle time, as well.
Touch the desired option along the bottom of the display to
adjust settings. See "Cycle Guide" for available settings on
each cycle. Not all settings are available with all cycles.
Cycle Status Lights
For details, see "Cycle Status Lights".
Wash Temp
The recommended wash temperature is preset for each
cycle. You may also select a wash temperature based
on the type of fabric and soils being washed. For best
results, follow the garment label instructions. All wash
temperatures feature a cold rinse.
Spin
This washer automatically selects the spin speed based
on the cycle selected. Some preset speeds can be
changed.
Faster spin speeds mean shorter dry times, but may
increase wrinkling in your load.
Slower spin speeds reduce wrinkling, but will leave
your load more damp.
Soil
The Soil setting (wash time) is preset for each wash
cycle. For most loads, use this preset soil level. When
you change the soil setting, the cycle time will increase
or decrease in the Estimated Time Remaining display.
For heavily soiled and sturdy fabrics, use the Soil setting
to select more wash time. For lightly soiled and delicate
fabrics, use the Soil setting to select less wash time.
Lower soil level settings will help reduce tangling and
wrinkling.
Presoak
Touch to add a Presoak to a wash cycle. Items will gently
tumble through the detergent and water to help loosen
tough stains.
OPTIONS
Touch to activate additional wash options or additional
features on the washer. Not all options are available on all
models.
_ Cleangoost with Steam
The CleanBoost with Steam option adds additional soak
and wash time to many cycles to help remove tough
stains, as well as a steam boost for added cleaning
power.
An integrated heater helps to maintain optimal wash
temperatures. See the "Cycle Guide" for cycles that
allow the CleanBoost with Steam option.
_ Extra Rinse
Activate this option to add an extra rinse to most cycles.
NOTE: Some cycles include this feature as a default.
See "Cycle Guide" for details.
4
Loading ...
Loading ...
Loading ...