Loading ...
Loading ...
Loading ...
OPERATING INSTRUCTIONS
(continued)
Signal. Operates with any cycle. (on models so equipped)
The signal control can be set anywhere between
OFF and LOUD, depending on the desired sound
level. The signal will sound just before the end of the
cycle to remind you to remove the clothes.
To stop the signal while sounding, turn the signal
control to OFF or advance the Cycle Selector to OFF.
The signal should always be used when drying
polyester knits or permanent press items which
should be removed as soon as the dryer stops to
help prevent setting of wrinkles.
Polyester Knits & Permanent Press Drying Tips
,DO NOT OVERLOAD--
Garments being dried or
dewrinkled should tumble fleely.
.REMOVE CLOTHES
PROMPTLY To help prevent
wrinkling, remove clothes from
the dryer promptly at the end of
the &Ting cycles.
• PLACE ON HANGERS--
Permanent press and polyester
knit garments look best if placed
on haugers after duing.
The Difference Between Auto Regular and Timed Regular Drying (onmodels so equipped)
Auto Regular
When using the Auto Regular Cycles, the dwer
continually senses the temperature of the air in the
dryer drum. Wet laundry keeps the air cool. When
laun& y is dry enough (and the drum air warm
enough) the heat turns off. When the air cools, the
heat turns back on. This off and on cycling may
happen a number of times (depending on the fabric,
load size and Cycle Selector setting). The Cycle
Selector advances (when the heat is off) until it
automatically turns off the dryer.
Timed Regular
When using the Timed Cycles, you select the number
of minutes you wish the dryer to run and it turns off at
the end of this time period.
Drying Selections Guide for the Automatic Cycles (on models so equipped appearance may vary)
Set to AUTO REGULAR Set toward More Dry Set toward Less Dry
_'_ pad
auto ular •_••'_v_\ • • auto per'm, preml
• For most normal loads.
• For loads that include heavy-
weight fabrics.
• If you desire to remove more
moisture from your normal load.
• For light weight fabric loads.
*If you desire to remove less
moisture from the load.
8
Loading ...
Loading ...
Loading ...