Loading ...
Loading ...
Loading ...
- 9 -
press the touch control “B” for 2 seconds.
Display C = indicates the motor speed level selected and activates the timer.
Push-button D = switches on the cooker hood. Increases the motor speed. Touching the key at 3rd
speed, the intensive function runs for 10', then the appliance go back to work at the original speed.
During this function the display blinks.
Key E = The Timer times the functions on activation for 15 minutes, after which they are switched off.
The Timer is deactivated by re-pressing Key E. When the Timer is activated the decimal point must
flash on the display. The Timer cannot be activated if the intensive speed is functioning.
The “clean air” function is activated by pressing key E for 2 seconds when the appliance is switched
off. This switches the motor on for 10 minutes every hour at the first speed. During functioning a
rotary movement of the peripheral segments must be visualised on the display. When this time has
passed the motor switches off and the fixed letter “C” must be visualised on the display until the
motor re-starts after 50 minutes for another 10 minutes and so on. Press any key apart from the light
keys to return to normal functioning. Press key E to deactivate the function.
• The “automatic stop timer” delays stopping of the hood, which will continue functioning for 15
minutes at the operating speed set at the time this function is activated.
• Active carbon/grease filter saturation:
- When display item C flashes, at a speed where it alternates with the letter F (e.g. 1 and F), the
grease filters must be washed.
- When display item C flashes, at a speed where it alternates with the letter A (e.g. 1 and A), the
carbon filters must be replaced.
After the clean filter has been positioned correctly, the electronic memory must be reset by pressing
button A for approximately 5 seconds, until the indication F or A shown on the display C stops
flashing.
Loading ...
Loading ...