Loading ...
Loading ...
Loading ...
CUSTOMER RESPONSiBiLiTiES
H i i=lll ======l
DRIVE WHEELS (See Fig. 15)
Check reardrive wheelseach time youmowto be surethey
move freely. The wheels not turningfreely means trash,
grasscuttings,etc. may be insidethe drive wheel and dust
cover area and must be cleaned out to free drive wheels.
If necessary to clean the drive wheels, check both rear
wheels.
= Remove hubcaps and washers.,
o Remove wheels from wheel adjuster axles.,
. Remove any trash or grass cuttings from inside the
dust cover', pinion and/or drive wheel gear teeth..
o Ifyou remove the drive pinions, clean and lubricate with
spray lubricant or dry powdered graphite type lubricant
before reinstalling°
° The pinion gear must be installedwith the left gear on
the left side and with the right gear on the right side,
from an operator's view,_
• The pinion gear is stamped with an "L" (left) or "R"
(right) on the inside._ if instaIled incorrectly, the drive
system will not work.
• Place wheels back on adjuster axles..
• Replace washers and hubcaps..
LOCKNUT
HUBCAP
WASHER
E-RING
I
DRIVE PIN
DUST COVER
PINION
FIG. 15
14
Loading ...
Loading ...
Loading ...