Loading ...
Loading ...
Loading ...
5. Remove either top or back wiring knockout and install
approved Electricam Cabme CmamJo,
/
if hood is to be installed Non-Ducted:
e Purchase a CmeanCooking Fimter and attach it to the
aluminum mesh filtero
e Skip to "CONNECT WiRiNG" section on page 9,
See page 4 for Cmean Cooking Filter information.
Clean Cooking Fimter available by calling Sears
at 1-800o4-MY-HOME ®
ELECTRICAL
CABLE CLAMP
The following Steps (6 thru 13) are for
DUCTED INSTALLATION ONLY.
(3) #8 SCREWS LIGHT
PANEL
6.
Remove _ht Panel - held in place with (3) #8 screws
and (2) #8 screws. Disconnect light assembly wire
harness (white connector).
7. Remove Air Chute - held in place with one (1) scre_
NOTE: Be careful not to disconnect any wires.
AiR CHUTE
\
\
\
8. Remove Baffle from air chute.
BAFFLE
BAFFLE
\
Loading ...
Loading ...
Loading ...