Loading ...
Loading ...
Loading ...
5
WASH
The washer will fill to the correct water level based on the
load size and the Water Level selection. Certain cycles may
agitate during the fill process to boost cleaning. You will
hear the agitator rotate followed by a pause lasting several
seconds. When the wash cycle begins, you will hear the
agitator increase speed. The motor sounds may change at
different stages in the wash cycle while the washer performs
different wash actions.
RINSE
Certain cycles use a spray rinse, which adds water to the
tub while the basket spins. You will hear sounds similar to
the wash cycle as the washer rinses and moves the load.
You may hear the motor turning on briefly (short hum)
to move the basket while filling.
SPIN
The washer spins the load at increasing speeds for proper
water removal based on the selected cycle and spin speed.
DONE
Once the cycle is complete, this light will come on. For best
results, promptly remove the load.
LID LOCKED
The Lid Locked feature allows for
higher spin speeds. When lit, the lid is
locked and cannot be opened without
pausing the cycle. When the light is off,
the lid can be opened.
To open the lid after it has been locked, press START/
PAUSE. The lid will unlock once the washer movement
has stopped. This may take several minutes if the load
was spinning at high speed. Press START/PAUSE while
the lid is closed to resume the cycle.
Loading ...
Loading ...
Loading ...