Loading ...
Loading ...
Loading ...
Door Removal and Reversal hTstructions (continued)
TRIM REMOVAL (FULL-LENGTH TRiM MODELS ONLY)
Unsome modeUs, the refrigerator door has a full Hengthtrim piece which
continues from the bottom of the handUeto the bottom of the door, The top
of the trim attaches to the handUebracket (Figure 1. orfits around the base
of the handUe(Figure 2). An adhesive "trim Uock"is positioned about haffway
down. The bottom of the trim is heUdin pUaceby either an adhesive trim Hock
or a trim Uockwith two prongs inserted into a hoUeon the face of the door.
TO REMOVE TRIM:
1. Remove trim by gentHypulling trim Hockareas out and away from door.
2. When trim is free from door. sfide the trim straight down and away
Irom base of handle.
NOTE: For models with short handle trim. remove bysliding trim straight
down and off of handle bracket.
TO REMOVE REFRIGERATOR HANDLE:
(Handles may be easier to reverse while doors are off..
Figure 1 Style Handles
1. Remove two screws attaching handle to top of refrigerator door.
2. Remove screw attaching bottom of handle to door.
3. Remove two hole plugs and hinge pin plug on top of door and install
on opposite side. Use Phillips head screwdriver to remove plastic
screw plug from front of door and install on opposite side
Figure 2 Style Handles
1. Remove two screws attaching handle to top of refrigerator door.
2. Swing top of handle away from door and slide handle down and off of
dovetail button.
3. Remove screw and dovetail button and install on other side, moving
hole plugs from corresponding holes to opposite side.
TO ATTACH REFRmGERATOR HANDLE:
Figure 1 Style Handles
1. Secure bottom of handle with screws.
2. Secure top of handle with screws.
Figure 2 Style Handles
1. Start with handle offset away from door. Place bottom of handle over
dovetail button, swing handle into an upright position and pull upward,
locking it into place.
2. Secure top of handle with screws.
TO ATTACH TRmM:
1. Slide both trim locks out of trim.
2. Insert new adhesive trim locks contained in your literature pack.
NOTE: Trim lock must be removed and installed by sliding over the
two donut shaped areas.
Fuml
Length
Trim
f
_HandBe
Adhesive
Trim
Figure 1
Lock Handle
_dBe over
Dovetaim
utton
Trim
Lock
3, Install trim to handle by sliding under base of handle, Carefully align
trim and press down at trim lock locations,
4, Use rubbing alcohol to remove any adhesive residue from old trim
lock locations,
Figure 2
Loading ...
Loading ...
Loading ...