Loading ...
Loading ...
Loading ...
12
AIR CONDITIONER FEATURES (continued):
If the display reads F1
a sensor has failed.
If the display reads F2
a sensor has failed.
If the display reads F4
a sensor has failed.
S
:YSLEEP FEA
SEE
:
If the display reads FJ
a sensor has failed.
RESET FILTER
:
:
PRESS
ON/OFF BUTTON
PRESS
MODE BUTTON
SELECT HEAT
F
F
Note: This feature can be used with any combination of FAN Speeds, Timer
.WhenintheHeatMode, the
fan will run continuously while heat is needed. The temperature will automatically be maintained anywhere between 61F
(16C) and 86F(30C). When the room set temperature is satisfied, the fan will cycle off and on to circulate and sample
the room air.
RESET
FILTER
N
RESET
FILTER
N
RESET
N
FILTER
RESET
N
FILTER
RESET
N
FILTER
RESET
N
FILTER
RESET
FILTER
RESET
FILTER
RESET
FILTER
RESET
FILTER
Note: When this switch is disabled(
DOWN)
,set temperature range will be 61-86 . When this switch is enabled (UP), set
temperature range in cooling will be 65-86
F
and that in heating will be 61-78 . The default setting is DOWN (disabled).
RESET FILTER FEATURE:
Note: This feature can be used with any combination of FAN speeds, Timer. When in the “Heat” Mode, the fan will run continuously
while heat is needed. The temperature will automatically be maintained anywhere between 61°F (16°C) and 86°F (30°C). When the
room set temperature is satisfied, the fan will cycle off and on to circulate and sample the room air.
Note: When this switch is disabled (DOWN), set temperature range will be 61-86°F. When this switch is enabled (UP), set
temperature range in cooling will be 65-86°F and that in heating will be 61-78°F. The default setting is DOWN (disabled).
If the display reads “F1”,
a sensor has failed.
If the display reads “F2”,
a sensor has failed.
If the display reads “F4”,
a sensor has failed.
If the display reads “FJ”,
a sensor has failed.
Loading ...
Loading ...
Loading ...