Loading ...
Loading ...
Loading ...
ASSEMBLY INSTRUCTIONS
11
STEP 10
NOTE: The RIGHT HANDLEBAR SHAFT(22) has an R stamped on the end of the handlebar shaft. The
RIGHT HANDLEBAR SHAFT(22) has right hand threads and is tightened by turning clockwise.
The LEFT HANDLEBAR SHAFT(21) has an L stamped on the end of the pedal shaft. The LEFT
HANDLEBAR SHAFT(21) has left hand threads and is tightened by turning counterclockwise.
Attach the HANDLEBAR(48) to the left side by threading the LEFT HANDLEBAR SHAFT(21) to the LEFT
CRANK(18) and tighten securely. The shoulder of the HANDLEBAR SHAFTS(21, 22) should be in contact
with the CRANKS(18, 19) when securely tightened.
Repeat on the right side in order to attach the other HANDLEBAR(48) to the RIGHT CRANK(19).
STEP 11
Install two AAA batteries into the METER(13), the batteries are not included. See page 13 for detailed
battery installation instructions. Insert the METER(13) onto the METER PLATE(50). Connect the SENSOR
WIRE(14) to the connecting wire of the METER(13).
Shoulder
Shoulder
Loading ...
Loading ...
Loading ...