Loading ...
Loading ...
Loading ...
Constant Settings
Select Jumpmaster, select a jump type, and select Constant.
Percent Max.: Sets the jump range for all jump types. A setting less than 100% decreases the drift distance to
the DIP, and a setting greater than 100% increases the drift distance. More experienced jumpmasters may
want to use smaller numbers, and less experienced skydivers may want to use larger numbers.
Safety Factor: Sets the margin of error for a jump (HAHO only). Safety factors are usually integer values of two
or greater, and are determined by the jumpmaster based on specifications for the jump.
K-Freefall: Sets the wind drag value for a parachute during freefall, based on the parachute canopy rating (HALO
only). Each parachute should be labeled with a K value.
K-Open: Sets the wind drag value for an open parachute, based on the parachute canopy rating (HAHO and
HALO). Each parachute should be labeled with a K value.
K-Static: Sets the wind drag value for a parachute during a static jump, based on the parachute canopy rating
(Static only). Each parachute should be labeled with a K value.
Activities and Apps
Your device can be used for indoor, outdoor, athletic, and fitness activities. When you start an activity, the device
displays and records sensor data. You can save activities and share them with the Garmin Connect community.
You can also add Connect IQ
™
activities and apps to your device using the Connect IQ app (Connect IQ Features,
page 28).
For more information about activity tracking and fitness metric accuracy, go to garmin.com/ataccuracy.
Starting an Activity
When you start an activity, GPS turns on automatically (if required).
1 From the watch face, press START.
2 Select an option:
• Select an activity from your favorites.
• Select , and select an activity from the extended activity list.
3 If the activity requires GPS signals, go outside to an area with a clear view of the sky, and wait until the
device is ready.
The device is ready after it establishes your heart rate, acquires GPS signals (if required), and connects to
your wireless sensors (if required).
4 Press START to start the activity timer.
The device records activity data only while the activity timer is running.
Tips for Recording Activities
• Charge the device before starting an activity (Charging the Device, page 3).
• Press LAP to record laps, start a new set or pose, or advance to the next workout step.
• Press UP or DOWN to view additional data pages.
Changing the Power Mode
You can change the power mode to extend battery life during an activity.
1 During an activity, hold MENU.
2 Select Power Mode.
3 Select an option.
The watch displays the hours of battery life gained with the selected power mode.
6 Activities and Apps
Loading ...
Loading ...
Loading ...