Loading ...
Loading ...
Loading ...
7
INSTALLATION & DUCTING
DUCTED OPTION
INSTALLATION
1. Remove the lter and light globes. (If installed)
2. Remove the stainless steel fascia (2 screws) - take care not to damage the fascia.
3. Determine the most eecient path for the ductwork, minimise bends and keep the length of the
ductwork to a minimum.
4. It is important to run and nish (install roof / wall caps) prior to installation on the hood.
5. Cut out the cabinetry as per the installation diagram. Ensure that access has been allowed for the
power cable.
6. Hold the hood up to the underside of the cabinet (2 people required); Screw the hood to the
cabinetry.
7. Attach the ducting adaptor to the ducting.
8. Re-install the stainless steel fascia.
9. Re-install lter.
10. Plug in the power to the unit, turn on and test.
WARNING: Do not penetrate any screws into the rangehood as this may result in electrical hazards. Failure
to install the screws or xing device in accordance with these instructions may result in electrical hazards.
NOTICE: ALL DUCTING MATERIAL MUST BE COMPLIANT WITH THE LOCAL LAWS IN FORCE.
Loading ...