Loading ...
Loading ...
Loading ...
Grill Lighting Instructions
1. Before each use, check all hoses for cracks, nicks, cuts,
burns or abrasions, if a hose is damaged in any way, do
not use your grill before replacing the hose with an
authorized part from the Parts List. Also make sure all
gas supply connections are securely tightened.
2. Familiarize yourself with the safety and Use and Care
instructions in this manual. Do not smoke while lighting
grill or checking gas supply connections.
3. Be sure the LP Gas tank is filled.
4. Open the Grill Lid.
5. Check that the end of each Burner Tube is properly
located over each Valve Orifice.
Failure to replace a faulty hose, secure gas supply
connections or to open the Lid before proceeding
to the Lighting Procedures could result in a fire
or explosion that could cause serious bodily injury,
death, or property damage.
6. Set Control Knobs to OFF and open the LP Gas
tank valve SLOWLY 1/4 of a turn. For Natural Gas
open the Shut Off Valve at source.
| Open LP Gas tank _-"_
OFF
7. Push and turn one Control Knob to IGN and hold it in
3-4 secs to ignite the Burner._Once the burner is lit,
turn the knob back to HIGH,
!
IGN
Low_
OFF
8. If ignition does not occur in 5 seconds, turn gas off at
source and turn Control Knobs OFF. Wait at least 5
minutes for gas to clear, then retry. If your grill still fails
to light turn the burner Control Knob(s) and gas source
OFF and conduct a leak test of ALL gas connections
and gas sources as explained in the Use and Care
section of this manual, if no leaks are detected, wait 5
minutes for any gas to clear and repeat the lighting
procedure.
9. After one Burner is lit, turn the tank valve SLOWLY one
more 1/4 of a turn for 1/2 of one complete turn.
10. Repeat steps to light each burner individually. Turn
Knob for each other burner and light as you move
toward the fuel source.
Burner Control Knobs on Control Panel
Main Burner Back Infrared
Burner Burner
16
Back Burner Lighting Instructions
1. Follow steps 1 through 6 of the Grill Lighting
instructions.
2. Push and turn the Control Knob to IGN and hold it in
3-4 seconds to ignite the Burner.
3. Keep pressing and turning knob to HIGH and hold in
5-10 seconds before releasing.
4. if ignition does not occur in 5 seconds, turn gas off
at source and turn Control Knobs OFF. Wait at least
5 minutes for gas to clear, then retry. If your grill still
fails to light turn the Control Knob(s) and gas
source OFF and conduct a leak test as explained in
the Use and Care section of this manual. If no
leaks are detected, wait 5 minutes for any gas to
clear and repeat the lighting procedure.
5. After Burner is lit, turn the tank valve SLOWLY one
more 1/4 of a turn for 1/2 of one complete turn.
IMPORTANT: Do not use the Back Burner and Main
Burners at the same time. Backburner is for Rotisserie
Cooking only.
BACK BURNER KNOB:
!
IGN
OFF
Infrared Burner Lighting
1.
2.
3.
4.
INFRARED BURNER
KNOB: |
IGN
Low_
OFF
Instructions
Follow steps 1 through 6 of the Grill Lighting
instructions.
Push and turn the Control Knob to IGN and hold it in
3-4 secs to ignite the Burner.
Keep pressing and turning knob to HIGH and hold in
5-10 seconds before releasing.
if ignition does not occur in 5 seconds, turn the
burner Control Knob(s) and gas source OFF and
conduct a leak test as explained in the Use and
Care section of this manual. If no leaks are de-
tected, wait 5 minutes for any gas to clear and
repeat the lighting procedure.
5. After Burner is lit, turn the tank valve SLOWLY one
more 1/4 of a turn for 1/2 of one complete turn.
Side Burner Lighting Instructions
1. Follow steps 1 through 5 of the Grill Lighting
Instructions.
2. Open Side Burner Lid.
3. Set Control Knobs to OFF and open the LP Gas
tank valve SLOWLY 1/4 of a turn.
4. Push and turn control knob to HIGH ._
5. You may have to push and turn the Control Knob up
to 3 or 4 times to light.
6. If ignition does not occur, turn gas off at source and
turn Control Knobs OFF. Wait at least 5 minutes for
gas to clear, then retry, if your grill still fails to light turn
the burner Control Knob and gas source OFF and
conduct a leak test of ALL gas connections and fuel
sources. If no leaks are detected, wait 5 minutes for
any gas to clear and repeat the lighting procedure.
Manually Lighting Your Grill By Paper Match
To light your gas grill by match, insert a match into the
Lighting Stick and follow steps 1 through 6 of the Grill
Lighting Instructions. Then, light the match and place
(continue over page)
Loading ...
Loading ...
Loading ...