Loading ...
Loading ...
Loading ...
ENGLISH
1
Select the items.
The measurement results of each item can be checked here.
A.Set SpConf.Ck
(Remote control unit)
2
Press the ENTER button and display the verification screen.
(Remote control unit)
NOTE:
• When measurements have been made using the measurement microphone, speakers with a built-in
filter such as subwoofers might be set with a value that differs from the physical distance because of
the internal electrical delay.
[Speaker Config. Check] [Delay Time Check] [Channel Level Check]
3
If the check ends, press the ENTER button again.
(Remote control unit)
4
Select from the following three items based on the measurement
results.
• Store : Set with the checked measurement value.
• Retry : Perform the measurement again.
• Cancel : Cancel the checked measurement value.
A.Set <Store
(Remote control unit)
5
When the “Store” is selected, all parameters are stored up and
switch to the SUBWOOFER MODE setting.
(Remote control unit)
24
Check of the measurement results
Loading ...
Loading ...
Loading ...