Loading ...
Thank you for using our Multifunctional Fruit and Vegetable Juicer. To correctly use and maintain this product, we
have specially prepared these instructions. Please carefully read these instructions before using the product and keep it for
further consulting.
This manual is only applicable to the SIF-3301 Multifunctional Fruit and Vegetable Juicer from SiFENE who reserves
the right of final interpretation. All contents in these instructions are used only as references for users when using and
maintaining this product. All users are welcome to consult the Customer Service Department regarding any outstanding
issues. If there are deficiencies in these instructions, all users are welcome to share their opinions with us. We hope that
our products make your life warm, sweet, convenient and healthy.
1.Input voltage of this product is 120V～60Hz, please confirm before use.
2.Disconnect the power supply before dismantling, assembling, or adjusting any part.
3.The product has Y type connection. If the power cable is damaged, contact our customer service department or
have it replaced by a designated service center directly.
4.Before use, please check if the power cord, plug, fine strainer, auger, noodle extruding body, and other parts are
damaged. Please stop using the product if any damage is found and contact our customer service department, or go to
SiFENE designated maintenance shop to repair. Do not disassemble and repair yourself.
5.If product maintenance is necessary after use, contact our customer service department, or have the maintenance
done by a designated service center directly. It is dangerous to dismantle the product by yourself.
6.Before switching on the power, please make sure that the removable parts are fully installed, such as the juicing
body, auger, fine strainer, juicing body cover, etc.
7.During operation, to avoid any damage to the operator or the product, it is strictly forbidden to put fingers or sharp
objects into the material inlet and directly contact the rotating parts such as the auger, etc.; it is strictly forbidden to use
any object to replace the pusher rods. It is strictly forbidden to keep eyes close to the material inlet to avoid injury.
8.The ingredients should be cut into small pieces so that they can be put into the inlet of the juicing body. If there are
fruits and vegetables with kernels, hard seeds, thick skins, or hard shells, remove them before processing.
9.When ingredients are put in, the force to push the ingredients should not be too great.
10.It is normal for the fine strainer, juicing body cover, auger, and other parts to be stained after juicing certain fruits
and vegetables. It does not affect the quality of the food and will not be harmful to eaters' health.
11.The product is equipped with an intelligent protection chip, making it automatically stop after 10 minutes of
continuous work. At this time, please stop the operation for 20-30 minutes, and then continue to use the motor after
cooling. This method is conducive to extending the service life of the product.
12.The product has a current limiting design. When processing harder ingredients, the motor will be locked-rotor and
the current will increase. When the current exceeds 1.9A, the machine will make a “click” sound and the motor will stop
working. This method can effectively protect the motor from over-current and extend the service life of the motor.
13.If the motor stops automatically due to current-limiting protection or stalled rotor during operation, press the
"Reverse" button to withdraw the ingredients, and then press the “ON/OFF ”key button to make the machine
work normally use. If the rotor is still blocked, it is recommended to clean the ingredients in the auger before continuing
to use it. This method is to protect the motor.
14.After use, please wait until the motor and auger stop rotating and make sure that the power is disconnected before
removing the detachable parts of the machine.
15.All parts of this product are not allowed to be disinfected with hot water over 80°C/176°F and microwave ovens to
avoid thermal deformation damage. Parts and materials in contact with food ingredients are, clean, hygienic, reliable, and
in line with food hygiene certifications.
16.Do not put the juicer body into water or other liquids, nor flush it with water or other liquids to avoid any damage to
the machine body.
17.Do not clean the product with steel wool, abrasive cleansers, or corrosive liquids (such as gasoline or acetone).
18.Store the product in a place out of the reach of children. Use or play of the product by persons with disabled limbs,
sensory or mental disorders, or by persons without relevant experience or knowledge (including children) is forbidden.
19.This product is only applicable to individual or home applications.
20.This product is a Class I appliance. The grounding wire of the socket must be well-grounded.
02 03
Loading ...
Loading ...
Loading ...