Loading ...
Loading ...
Loading ...
En-4
• Make sure the polarity of the batteries is correct.
• Do not use manganese batteries and leaking batteries. The remote controller could
malfunction.
• Do not use rechargeable batteries.
• The battery replacement indicator lights up when the battery is running low. In about
7 days after the indicator starts lights up, the remote controller stops working.
• Replace all batteries with new ones of the same type.
• Batteries can be used for approximately 1 year. However, batteries with expired
shelf lives last shorter.
• Press RESET gently using a thin instrument.
If the RESET button is not pressed, the remote controller may not operate correctly.
Before operation: Insert the power supply plug into the power outlet and/or turn the
breaker on.
Installing the remote controller batteries
PREPARATION BEFORE OPERATION
• Press CLOCK gently using a thin instrument.
Setting current time
Changing temperature units (°F→°C)
Unit is preset with °F.
1.
Press RESET while
the temperature but-
tons are pressed.
1.
Remove the front lid.
3.
Install the front lid.
4.
Press RESET.
1.
Press CLOCK.
3.
Press CLOCK again.
2.
Press the TIME buttons to set
the time.
Each press increases/decreases
the time by 1 minute (10 minutes
when pressed longer).
2.
Insert the negative pole
of AAA
alkaline batteries fi rst.
• Press RESET gently using a thin instrument.
• To change temperature unit from °C to °F, press RESET.
JG79Y191H01_en.indd 4 2016/07/27 14:48:52
Loading ...
Loading ...
Loading ...