Loading ...
Loading ...
Loading ...
13
12. Set the console assembly (H) on the
Handrails (72). Make sure that no wires are
pinched.
Insert the excess Upright Wire (80) into the con-
sole assembly (H). Then, tighten the two ties (J)
around the Upright Wire and cut off the ends of
the ties.
Attach the console assembly (H) with the four
5/16" x 3/4" Screws (13) that you removed in
step 9 and four 5/16" Star Washers (7); do not
tighten the Screws yet.
12
H
J
13
7
13
7
80
72
72
13. Attach the Pulse Crossbar (75) to the console
assembly (H) with four #8 x 3/4" Screws (11);
start all four Screws, and then tighten them.
Do not overtighten the Screws.
Firmly tighten the four 5/16" x 3/4" Screws
(13).
13
H
13
75
11
11
13
Loading ...
Loading ...
Loading ...