Loading ...
Loading ...
i
mpo nt Safety
nsttuctions (continued)
Avoid fire hazard or
electrical shock. Do not use an
adaptor plug or extension cord or
remove grounding prong from
electrical power cord. Failure to
follow this warning can cause serious
injury, fire or death.
Grounding type
_al receptacle
Power supi0_y
cord with 3_prong
grounding plug
CORRECT
Use this way ONLY
Do not use or mix
liquid chlorine bleach with other
household chemicals such as toilet
cleaners, rust removers, acid or
products conraining ammonia. These
mixtures can produce dangerous
fumes which can causeserious injury
or death,
Pre yen t Injury
To prevent shock hazard and assure stability during operation, the
washer must be installed and electrically grounded by a qualified service person in
accordance with local codes. Installation instructions are packed in the washer for
installer's reference. Referto INSTALLATIONINSTRUCTIONSfor detailed grounding
procedures. If the washer ismoved to a new location, have itchecked and reinstalled
by a qualified service person.
To prevent personal injury or damage to the washer, the electrical
power cord of the washer must be plugged into a properly grounded and polarized
3-prong outlet. The third grounding prong must never be removed, Never
ground the washer to agas pipe. Do not use an extension cord or an adaptor
plug.
Follow package directions when using laundry products. Incorrect
usagecan produce poisonous gas--resulting in serious injury or death.
• Donotcombinelaundryproductsforusein 11oadunlessspecifiedonthelabel.
• Do not mix chlorine bleach with ammonia or acids such asvinegar.
To prevent serious personal injury and damage to the washer:
• All repairs and servicing must be performed by an authorized servicer
unless specifically recommended in this Owner's Guide. Use only authorized
factory parts.
• Do nottamper with controls.
• Do not install or store tile washer where it will be exposed to the weather.
_ALWAYS disconnectthe washer from tile electrical supply before
attempting any service or cleaning. Failure to do so can result in electrical shock or
injury.
To prevent injury, do not reach into the washer while parts are
moving. Before loading, unloading or adding items, push in the cycle selector knob
and allow tile tub to coast to acomplete stop before reaching inside.
Failureto comply with these warnings could result in serious personal injuries.
Thiswasher isequipped with an electrical overload protector. The motor will stop
if it becomes overheated. The washer will automatically restart after a cool down
period of up to 30 minutes, if the washer hasnot been manually turned off during
this time.
SAVE THESE LNSTRUCTIONS
Note: The instructions appearing in this
Owner's Guide are not meant to cover
every possible condition and situation
that may occur. Common sense and
caution must be practiced when
installing, operating and maintaining
any appliance.
Loading ...
Loading ...
Loading ...