Loading ...
Loading ...
Loading ...
HOW TO DELAY THE START OF PYROLYSIS
After selecting the most suitable mode of pyrolysis, upon appearance of the message: CYCLE
ACTIVEMENU
Press key
(9) to postpone the start-up of pyrolysis with respect to the current time.
select the item: END COOKING with key
(8).
Upon appearance of the message TIME SETTING, use the keys
(3) to set the time of end
of cooking within the next 23 hours and 59 minutes.
Confirm the setting with the key
(8).
The oven immediately locks the door and shows the symbol
.
It will be automatically activated later for a set duration and will stop at the programmed end of
cooking time.
A clear message: “OVEN TO BE TURNED ON IN .. ..”
at 15 sec. intervals will be displayed to show the time remaining before the oven is turned on.
It is possible, however, to recall the information on the display at any time by pressing one of the
two keys
(3)
A delayed pyrolysis programme can be deleted by simultaneously pressing the keys:
(3)
The oven will immediately start the pyrolysis cycle.
END OF PYROLYTIC CYCLE
When the pyrolysis time is up, the door of the oven will remain closed until the cooking
temperature has dropped to an acceptable value.
When the symbol
goes off, it means that oven functions have been reset.
Notes:
When you open the door, you could see some white ashes on the bottom and on the walls of the
oven. Remove them with a damp sponge when the oven is cold.
Loading ...
Loading ...
Loading ...