72623 User Manual

Loading ...

8. OPERATING INSTRUCTIONS

First select required torque scale, then pull-out torque setting handle , lock into the

spindle at 90 degrees and turn until handle edge is at the required torque value.

NOTE: To obtain correct torque setting ONLY move the handle UPWARDS through the

range. DO NOT set the torque required by moving down through the range as this will NOT

give the correct torque setting.

When correctly set, align and push the torque setting handle back into the handle body

FIG.1

FIG.2

FIG.3

80Nm

30Nm

100Nm

80Nm





*83317 shown

Loading ...

DRAPER 72623 Push Through' Torque Wrench, 1/4 - 3/8" Sq. Dr., 5 - 35Nm