Loading ...
MARCH 2018
WARNINGS
• Do not touch any hot surfaces
• Do not plug or unplug unit with wet hands
• Do not immerse unit, cord or plug in liquid at any time
• Unplug cord from outlet when not in use and before cleaning
• Do not operate unattended
• Do not use the unit for anything other than intended use
• Keep children and animals away from unit
• Always use on a rm, dry and level surface at least 12” from walls or any other obstruction
• Any incorrect installation, alterations, adjustments and/or improper maintenance can lead to property loss and injury.
All repairs should be done by authorized professionals only.
• Do not use if unit has a damaged cord or plug
• If the supply cord is damaged it must be replaced by the manufacturer, or a qualied service agent to avoid any
electrical hazards
• Never clean with ammable or pressurized cleaners. Do not store or use gasoline or other ammable vapors and liquids
in the vicinity of this or any other appliance due to re hazard.
• This appliance is equipped with a properly grounded power cord. All power outlets should be installed with a properly installed
grounded circuit.
• Local, state and provincial electrical safety codes and guidelines must be strictly adhered to.
• This unit must be used by qualied and trained personnel. Staff should be instructed on proper daily operation and
maintenance prior to usage
OPERATION
Before operating machine ensure that all covers, doors and moving components are installed properly and working prior to
usage. This will ensure unit is in safe operating order.
TO START
1. Connect to power source
2. Turn the power switch to the ‘I’ position
•The display will light up and the heating element will start
•“LO H2O” will ash once on the display until the water tank is lled with water. Once the tank is full, “LO H2O” will stop
ashing and the display will show cabinet temperature
3. Fill the tank up with water
•Lift the tank cover
•Fill with water until “LO H2O” stops ashing
•NOTE: DO NOT OVERFILL
4. Wait 20 minutes before you put food into the machine
CABINET TEMPERATURE
AIR TEMPERATURE
HUMIDITY
°F °C
Loading ...
Loading ...
Loading ...