Loading ...
Loading ...
Loading ...
11
Secure the bottom of the duct with (2) 4.2 x 8 mm T20
®
screws
using a T20
®
Torx
®
drive (or T20
®
adapter provided) to tighten.
Complete Installation
1. For non-vented (recirculating) installations only, install
charcoal filters over metal grease filter. See the “Range
Hood Care” section.
2. Install metal filters. See the “Range Hood Care” section.
3. Check the operation of the range hood blower and light.
See the “Range Hood Use” section.
NOTE: To get the most efficient use from your new range
hood, read the “Range Hood Use” section.
RANGE HOOD USE
The range hood is designed to remove smoke, cooking vapors
and odors from the cooktop area. For best results, start the
hood before cooking and allow it to operate several minutes
after the cooking is complete to clear all smoke and odors
from the kitchen.
The hood controls are located on the front side of the canopy.
Range Hood Controls
Operating the Light
The On/Off Light button controls both lights. Press once for
On and again for Off.
Operating the Blower
The Blower Speed buttons turn the blower on and control the
blower speed and sound level for quiet operation. The speed
can be changed anytime during fan operation by pressing the
desired Blower Speed button.
The Blower Off button turns the blower Off.
A. Duct cover holes
B. Duct cover
C. Control panel
D. Glass canopy
E. Grease filter
F. Lamp cover
G. Incandescent lamp (position
and number of lamps may vary)
H. Grease filter release handle
A
B
C
D
E
F
G
H
A. On/Off light button
B. Blower off button
C. Blower speed minimum button
D. Blower speed medium button
E. Blower speed maximum button
A
B
C
D
E
Loading ...
Loading ...
Loading ...