Loading ...
Loading ...
Loading ...
FIND YOUR PROBLEMHERE
Surfaceunitdoesnotheat.
Ovenlightdoesnotwork.
INSTALLATION
Rangenotlevel.
Cannotmoveapplianceeasily.Appliance
must be easilyaccessiblefor service.
POSSIBLECAUSE
1. No power to range.
2. Low heat setting.
3. Elements not seated properly in
terminal.
4. Bent terminals on surface unit.
5. Incorrect control turnedon.
1. Burned-outlight bulb.
1. Poorinstallation.
2. Weak, unstablefloor.
3. Kitchen cabinet misalignment may
make range appear to be unlevel.
I. Cabinets not square or are built intoo
tight.
2. Carpetinginterferes with range.
3. Shortcord/plug set.
4. Poor flooring.
HOW TO FIX IT
1. Check steps under "Range does not
operate."
1. At extremely low heat settings, the sur-
face unitindicator light may come on
before the surface unitstarts to operate.
Turn the controlto a slightly higher
setting until the unit comes on.
1. Turn controlto OFF. Be sure surface
unit is COOL.Lift outsurface unit. Posi-
tion unit properly, following instructions.
1. Turn controlto OFF. Be sure surface
unit is COOL.Lift out surface unit.
Straightenterminals.Positionunit properly
and replace, following instructions.
i. Be sure to use correct controlforunit
to be used:
1. Replace following instructionsunder
oven light.
I. Place oven rack incenter ofoven.
Place alevel on the oven rack. Adjust the
range leveling legs until the level indicates
that the rackis level.
2. Contact carpenterto correct sagging or
sloping floor.
3. When oven is level, cooktop may not
appear to be level with countertop.
1. Besure flooris level and can
adequately support range.
2. Contact carpenter to correct sagging or
sloping floor.
1. Be sure cabinets aresquare andhave
sufficient roomfor range clearance.
2. Contact cabinet maker to correct
problem.
1. Contact builder or installer to make
appliance accessible.
1. Provide sufficient space so range can
be lifted over carpet.
1. Install a longer cord/plug.
1. Be sure flooris level and can support
weight of range.
23
Loading ...
Loading ...
Loading ...