Loading ...
Loading ...
Loading ...
9 – ENGLISH
7. REC OUT: You can record from the Model One BT radio by connecting a cassette deck’s audio
input (or other recording device) to this fixed level stereo output. You can also use the Model One
BT radio as a high performance analog tuner by connecting it to the audio input of a preamplifier
or integrated amplifier. The primary speaker will not be muted when using this output. This jack
accepts a 3.5mm stereo male mini connector.
8. AC INPUT: Connect the included power cord to this input. When unplugging the power cord
from the wall outlet, always grab it by the plug. We recommend using a powerstrip with surge
protection. When disconnecting the power cord, always grasp it firmly at the connector. Never
pull on the cord itself. Do not bundle the power cord together with the external FM antenna or
any audio cables, as this can inject noise in the audio path.
Bluetooth Operation
Prior to pairing, verify your device supports Bluetooth 2.1+EDR A2DP and your device is not con-
nected to any other Bluetooth product. Devices may pair differently. Below is a general guide.
1. Turn on the Model One BT to the Auxiliary position. This will power on the Bluetooth. Turn the
volume up about ¼ to start. Also turn up the volume on the source device (the device you are
streaming from).
2. Turn on the Bluetooth wireless technology on your enabled device.
3. Select “Tivoli Bluetooth (Not Paired)” when it appears on your device’s screen to initiate search-
ing. Some devices may prompt you for a PIN. If so, enter “0000”. “Tivoli Bluetooth” will change
from “Not Paired” to “Connected”.
4. You will hear a ring tone from the Model One BT confirming connection and you can begin play-
ing your music files wirelessly. Adjust the volume level on your device. You should not have to
pair your device again. Depending on your device, you may need to make multiple attempts
at Pairing and/or Connecting to the Model One BT, but please give your device adequate
time to Pair or Connect before repeating the process.
Pairing A Bluetooth Wireless Technology Enabled
iPhone/iPod Touch/iPad
1. Turn on the Model One BT to the Auxiliary position. This will power on the Bluetooth. Turn the
volume up about ¼ to start. Also turn up the volume on the source device (the device you are
streaming from).
2. Select “Settings” (depending on software version).
3. Select “General”.
4. Select “Bluetooth”.
5. Switch Bluetooth “On” to initiate searching.
6. Select “Tivoli Bluetooth (Not Paired)” when it appears on the display. If you are prompted to
enter a PIN, enter “0000”. “Tivoli Bluetooth” will change from “Not Paired” to “Connected”.
7. You will hear a ring tone from the Model One BT and you can begin playing your music files
wirelessly. Adjust the volume level on your device. You should not have to pair your iPhone/
iPod/iPad again.
The volume output level of music files varies. If you prefer an even higher output level, check the set-
tings in your iPhone/iPod touch/iPad: Set the EQ Off, the SoundCheck Off, and the Volume limit Off.
Loading ...
Loading ...
Loading ...