Loading ...
Loading ...
Loading ...
PRODUCT SPECIFICATIONS
Pressure Washer Specifications
Pressure ........................... 2,800 PSI
Flow Rate ........................... 2.2 GPM
Chemical Mix ................... Use as directed
Water Supply Temperature .... Not to exceed 100°F
Automatic Cool ............ Will cycle when water
Down System reaches 125°-155°F
Shipping Weight ........................ 73 Ibs.
Engine Specifications
Rated Horsepower ................ 6 at 3600 rpm
Bore .......................... 2.7 in. (69 mm)
Stroke ......................... 2.0 in. (50 mm)
Displacement .................. 11.4 in. (187 cc)
Spark Plug
Resistor ...................... NGK BPR6ES
Set Gap To: ...... 0.028-0.031 in (0.70-0.80 mm)
Intake Valve Clearance ...... 0.15 ± 0.04 mm (cold)
Exhaust Valve Clearance .... 0.20 ± 0.04 mm (cold)
Fuel Capacity ................ 0.53 Gallons (2.0 I)
Oil Type ......................... SAE 10W-30
GENERAL RECOMMENDATIONS
Regular maintenance will improve the performance
and extend the life of the pressure washer. See any
authorized Sears dealer for service.
The pressure washer warranty does not cover items
that have been subjected to operator abuse or
negligence. To receive full value from the warranty,
the operator must maintain pressure washer as
instructed in this manual including proper storage as
detailed in "Storage" on pages 19-20.
Some adjustments will need to be made periodically to
properly maintain your pressure washer.
All service and adjustments should be made at least
once each season. Follow the requirements in the
"Maintenance Schedule" chart on page 14.
NOTE: Once a year you should clean or replace the
spark plug and replace the air filter. A new spark plug
and clean air filter assure proper fuel-air mixture and
help your engine run better and last longer.
If equipped with inflatable tires, keep the air pressure
at the value marked on the tire or within 15 and 40 psi.
13
Loading ...
Loading ...
Loading ...