Loading ...
Loading ...
Loading ...
3. Toremovethetube,turntheknob
toloosenclamp;removetube.
VACUUMASSEMBLY
VACUUMBAGASSEMBLY
1. Openthezipperonthevacuum
bagandinserttheelbowtube.
2. Pushthesmallendoftheelbow
tubethroughthesmallopeningin
thebag.
Elbow
Tube
Small
/ Opening
Zipper
Opening Rib
NOTE: Make sure edge of the small
opening is flush against the flared area
of the elbow tube, and the rib on the
elbow tube is on the bottom.
3. Close the zipper on the bag. Make
sure the zipper is closed completely.
4. Remove blower tube from engine.
_ Gro ve
5. Insert the elbow tube into the blower
outlet. Make sure elbow tube is
aligned with the blower outlet
groove.
6. Turn clamp knob clockwise to tight-
en.
VACUUM TUBE ASSEMBLY
1. Align the lower vacuum tube as
shown. Push lower vacuum tube
into upper vacuum tube.
Upper
Vacuum Tube
Lower
Vacuum Tube
2. Insert a screwdriver into the latch
area on the vacuum inlet cover.
Latch _ _ _!_ ..... Blower
A_ ] _, Outlet
_" Latch Area
Vacuum
_._-_J7 - Inlet Cover
3. Gently tilt the handle of the screw-
driver toward the back of the unit
while pulling up on the vacuum in-
let cover with your other hand.
4. Hold the vacuum inlet cover open
until upper vacuum tube is installed.
Vacuum Inlet
RetainingPest
Vln°, tm
Cover
5. Place the hooks on the vacuum tube
on the retaining posts; pivot tube into
position. Secure vacuum tube by
turning the knob clockwise until tight.
-- _-- _oks
6,
When converting back to the blow-
er feature, make sure latch on the
vacuum inlet cover is securely fas-
tened.
Loading ...
Loading ...
Loading ...