Loading ...
Loading ...
DO NOT allow the pump to run dry!
Step 6: Fill the large basin and small basin with water. Make sure the pump is completely submerged in water.
Step 7: Plug the pump power cord to the wall outlet to run the fountain.
Be careful not to spill water onto the plug of the pump.
Step 4: Route the water tube of the assembled topper downwards through the assembled large basin. through the
door of Center Pedestal,Connect the water tube to the outlet nozzle of pump. Make sure the connection is
tight.insert the assmbled topper and twise clockwise to lock in place securely. (pls refer to the fig.8,9)
Step 5: Put the board located at the door of the Center Pedestal.
Step 1: Place the base pedestal and the large basin on a level surface. route the pump’s power cord downwards
through the resin tube in large basin. Lay the pump in the bottom of the large basin.And then route the pump’s
power cord through the base pedestal, the cord exits through the slot in the bottom of base pedestal.,Lastly align
the large basin with base pedestal, insert the large basin and twist clockwise to lock in place securely.(pls refer to
the fig. 1,2,3)
Step 2: Place the center pedestal and the small basin on a level surface. align the small basin with center
pedestal,make sure matching the slot under the center pedestal to the blocks on the small basin,insert the small
basin and twist clockwise to lock in place securely.(pls refer to the fig.4,5)
Step 3: Route the water tube of the fountain topper downwards through the middle hole of the small basin, then
align the fountain topper with the small basin. Make sure matching the slot under the fountain topper to the the
blocks on small basin. Insert the fountain topper and twist clockwise to lock in place securely, (pls refer to the
fig.6,7)
Loading ...