Loading ...
Loading ...
Loading ...
Troubleshooting en
47
Fault Cause Troubleshooting
Remnants of food on table-
ware.
Spray arm nozzles are
blocked.
▶ Clean the "Spray arms" →Page42.
Filters are soiled. ▶ Clean the filters.
→"Cleaning filters", Page41
Filters are inserted incor-
rectly and/or not engaged.
1. Insert the filters properly.
→"Filter system", Page41
2. Engage the filters.
Washing programme selec-
ted too weak.
▶ Select a more intensive washing
programme.
▶ Adjust the sensitivity of the sensors.
Tableware has been pre-
cleaned too intensely. The
sensors chose a weaker pro-
gramme. Stubborn soiling
cannot be entirely removed.
▶ Only remove large remnants of food
and do not prerinse tableware.
Tall narrow receptacles in
corner areas are not rinsed
adequately.
▶ Do not position tall narrow recept-
acles at too great an angle or in
corner areas.
Top baskets on right and left
are not set to same height.
▶ Set the top baskets on the left and
right to the same level.
→"Top basket", Page22
Detergent residue in the ap-
pliance
Lid of the detergent dis-
penser is blocked by items
of tableware parts and will
not open.
1. Arrange tableware in the top basket
tableware so the tab collecting tray
is not obstructed by tableware.
→"Arrange tableware", Page35
Items of tableware are blocking the
dispenser lid.
2. Do not place tableware or fra-
grance dispensers in the tablet col-
lecting tray.
The lid of the detergent dis-
penser is blocked by the tab
and will not open.
▶ Position the tab in the detergent dis-
penser crosswise, not vertically.
Tabs are used in the quick
or short programme. Dissolv-
ing time of the tab is not at-
tained.
▶ Select a more intensive Programme
or use "Powder detergent"
→Page31.
Loading ...
Loading ...
Loading ...