Loading ...
Loading ...
Loading ...
English
11
Assembling the pedestal
65-inch model
●
Do not remove the tapes fixing the fall-prevention
band until the installation is completed.
A
C
1
■ To change the height
Be sure to perform the following procedures when you
change the height after assembling the pedestal.
1
Remove the cover
.
2
Remove the assembly screws from the base.
3 Lift the TV and pull out the pole from the base.
4 Put the TV onto a work table with the screen panel
down on the clean and soft cloth.
5
Remove the assembly screws
from the support
bracket.
6 Pull out the pole from the main bracket.
7 Remove the support bracket.
8 Change the height. (p. 9)
9
Use the assembly screws
to fasten the support
bracket
to the pole securely.
10 Assemble the pedestal according to steps 2 to 5 in
“Assembling the pedestal”. (p. 8)
■ Preventing the TV from falling over
It is recommended to secure the pedestal to a furniture
as shown to prevent the TV from falling over.
●
This information is designed to reduce the risk of
injuries caused by the TV falling over. However, no
measure can guarantee protection in all cases.
Remove the tapes fixing the fall-prevention bands.
H
Loading ...
Loading ...
Loading ...