Loading ...
Loading ...
Loading ...
THE CONTROLS & OPERATION
7
INSTALLATION METHOD
Take out the product from the
package and fix the caster brake
before use.
Note: Before connecting the power
supply, please read “Safety
Information & Warning” carefully and
ensure that the power voltage meets
the requirements of this machine.
FAN/SHUTDOWN
First, turn the FAN knob to the
desired setting to start working. To
turn off the machine, turn the knob to
OFF.
OSCILLATION
After the power is turned on, turn the
swing knob to the “ ” position,
and the vertical blades of the
machine will automatically swing left
and right. When the swing knob is
turned to the “ ” position, the
horizontal blades will automatically
swing up and down; when the swing
knob is turned to “ ” position, the
horizontal and vertical blades will
automatically swing at the same time.
When the knob is turned to OFF
position, the swing function will stop.
COOLING
After the power is turned on, turn the
cooling knob to the ON position, and
the machine turns on the cooling
function; when the knob is turned to
the OFF position, the cooling
function is turned off.
When the cooling function is turned
on, it is necessary to ensure that the
water in the tank is not lower than
the minimum level; if the water level
is lower than the minimum, add water
in time to ensure the normal
operation of the water pump.
The figure below shows the
operation panel of FEC3K5GA00
Loading ...
Loading ...
Loading ...