Loading ...
Loading ...
Loading ...
11
Installation of wiring
connection
Remove the cover from the
eld wiring compartment.
DO NOT turn on the power until
installation is complete!
Connect the Power Supply
Cable to the rangehood.
Connect the Green (Green and
Yellow) ground wire under the
Green grounding screw. Attach
the White lead of the power
supply to the White lead of the
rangehood with a twist-on type
wire connector.
Attach the Black lead of the
power supply to the Black lead
of the rangehood with a twist-
on type wire connector.
Replace the eld wiring compart-
ment cover and the grease lters.
A. Home power supply cable
B. Black wires
C. UL listed wire connectors
D. White wires
E. Green (or bare) ground wire from home power supply connected to green ground screw
F. Range hood power supply cable
G. Range hood power supply cable connected to green ground screw
Remove the cover from the eld wiring compartment.
Connect the Power Supply Cable to the rangehood.
Connect the Green (Green and Yellow) ground wire under the
wire connector. Attach the Black lead of the power supply
to the Black lead of the rangehood with a twist-on type wire
The UPPER CHIMNEY
COVER
, use the UPPER
CHIMNEY COVER supplied
attach the UPPER CHIMNEY
COVER.
Make sure to seal all joints with
The LOWER CHIMNEY
COVER
Install the LOWER CHIMNEY
COVER by sliding it up over
the support and the UPPER
CHIMNEY COVER.
For ductless installations, line up the DUCTLESS DIVERTER
EXTENSIONS HORIZONTAL
in the LOWER CHIMNEY COVER
B. Black wires
C. UL listed wire connectors
CHIMNEY COVER
, place the DUCTLESS
exhaust opening of the EASY
CUBE . Fit the DUCTLESS
DIVERTER EXTENSIONS
HORIZONTAL
9
Position the upper chimney section and x the upper
part to the frame using the 2 screws removed previously.
8
Loading ...
Loading ...
Loading ...