Vinotemp VT-45R wine cooler

User Manual - Page 12

For VT-45R.

PDF File Manual, 16 pages, Download pdf file

Loading ...
Loading ...
Loading ...
TROUBLESHOOTING
SYMPTOM POSSIBLE CAUSE
Vibrations Check to make sure the wine cellar is on a level surface
The wine cellar is not on a level surface.
The door will not
The racks are out of position.
close properly.
The bottle is too long.
Fan is always
running.
Unit has no
power.
This is simply a function of the cooling system. The lower
the setting, the more the fan will run. if the room is
warmer than 90°F(32°C), it will run more.
The unit has been designed to run continuously when
operation at the lower temperatures.
Check the wall outlet for power. Make sure the outlet is not
controlled by a wall switch.
Make sure the
The inside The room may
temperature 90°F(32°C) or
does not seem adequately on
correct.
The unit does
not operate.
©
cooling vents are not obstructed.
be too hot. If the ambient temperature is
higher, the unit can have difficulty chilling
the white wine setting.
When using the unit for the first time, it can take up to 24
hours to reach the desired temperature.
Power is ON but
the unit will not
cool.
It may not
Make sure
electrical a
be plugged into the wall socket.
the wall socket it functional by testing another
ppliance in the power socket.
Make sure there are at least 3 to 5 bottles in the unit. Allow
at least 24 hours for the internal temperature to adjust.
If the room temperature is above 90°F(32°C), the unit can
have difficulty cooling. Humidity does not affect the cooling
ability of the unit.
To achieve accurate temperature control, the unit should
not be used of operated in any of the following locations:
© In a sunny place
© In a room with poor air circulation such as a garage near
another heat-producing appliance such as a dishwasher,
oven or refrigerator.
© With an outlet shared with a refrigerator, as the
refrigerator will drain power from the wine cellar.
In a cabinet or closet.
Make sure the cooling vents are not obstructed.
If the lower compartment does not cool, check if the fan on
the middle board is not running.
Loading ...
Loading ...
Loading ...