Loading ...
Loading ...
Loading ...
I-Beam
Nut
Washer
Washer
Nylock
Eye Bolt
Thimble
Guy Cable
*DO NOT USE TURNBUCKLES*
Fig.15
When placing cable clamps on the
wire, it is imperative that the U-
bolt side of the clip is placed on
the short turn-back side and the
saddle goes on the long side. (The
“live” end).
Guy cables should be
taut but not overstressed to
allow free self-leveling
STRUCTURAL NOTE: Guy cables must be installed
or fastened to a structural component of the
building at the angle shown in Fig.15 and Fig.17.
TURN-BACK
SIDE
(3mm)
SS CABLE
U-Bolt
Saddle
Thimble
Long side
(live end)
oo
45 to 60
CEILING/ROOF DECK
GUY CABLE
GEAR MOTOR
HUB
(BLADES NOT
SHOWN)
Beam
Drop
TAB ON FAN FRAME
Fig.14
Clamps
FIGURE 8
FIGURE 9
FIGURE 10
TRI-LITE HVLS SERIES FANS
TRI-LITE HVLS-M (04_29_15) Page 6 of 13
GUY WIRES
The package includes:
(4) Cable 3mm SS (66’ length provided to equal 4 @ 16.5’)
(8) Thimbles 6mm SS
(16) Cable Clamps 3mm
Extra hardware required:
(4) Forged Eye Bolts M6-1.0 x 100mm
(4) Nuts M6-1.0
(4) Nylocks Mg-1.0
(8) Washers Flat M6
STRUCTURAL NOTE: Guy cables must be installed
or fastened to a structural component of the building at
the angle shown in Figure 9 and Figure 11.
Loading ...
Loading ...
Loading ...