Loading ...
Loading ...
Loading ...
8
ASSEMBLY
Attaching Side Discharge Chute
Your mower is shipped as a mulcher. To convert to side discharge, follow the steps
below.
1. On the side of the mower, lift the mulch plug. See Figure 4.
2. Slide two hooks of side discharge chute under hinge pin on mulch plug
assembly and position hole in the chute over and on to the deck stud located
behind the discharge opening. See Figure 4. Lower mulch plug.
3. Secure the chute to the mowing deck using the wing knob included in the
manual bag. Hand tighten the wing knob onto the deck stud. See Figure 5.
Deck
Stud
Mulch
Plug
Figure 4
Figure 5
Adjustments
Cutting Height
There is a cutting height adjustment lever located above the rear left wheel.
1. Pull the height adjustment lever outward towards wheel (unit will tend to
fall when lever is moved outward). See Figure 6.
2. Move lever to desired position for a change in cutting height.
3. Release lever towards deck.
Figure 6
Loading ...
Loading ...
Loading ...