Loading ...
Loading ...
Loading ...
37
BEFORE YOU CALL
CONCERN CAUSE SOLUTION
DISPENSER (Ice & Water)(Continued)
Ice dispenser
is jammed.
• Ice has melted and fro-
zen around auger due to
infrequent use, tempera-
ture uctuations, and/or
power outages.
• Ice cubes are jammed
between ice maker and
back of ice container.
• Remove ice container, thaw, and empty the
contents. Clean container, wipe dry, and
replace in proper position. When new ice is
made, dispenser should operate.
• Remove ice cubes that are jamming
the dispenser.
Dispenser will
not dispense
water.
• Dispenser lock out is
engaged. (Does not apply
to Frigidaire Professional.)
• Water lter not
seated properly.
• Water lter is clogged.
• Household water line
valve is not open.
• Press and hold control lock for 3 seconds.
• For Frigidaire Gallery, remove and
reinstall the water lter. Be sure to push
the lter rmly so that you hear it lock
solidly into position.
For Frigidaire Professional, remove and
reinstall the water lter. Be sure to press
inward as you rotate it clockwise to lock it
in place.
• For Frigidaire Gallery, replace lter
cartridge. Be sure to remove protective
caps and push the lter rmly so that you
hear it lock solidly into position.
For Frigidaire Professional, replace lter
cartridge. Be sure to press inward as you
rotate it clockwise to lock it in place.
• Open household water line valve. See
CONCERN column AUTOMATIC ICE MAKER.
Water has an
odd taste and/
or odor.
• Water has not been
dispensed for an
extended period of time.
• Unit not properly con-
nected to cold water line.
• Draw and discard 10-12 glasses of water to
freshen the supply.
• Connect unit to cold water line that
supplies water to the kitchen faucet.
Water pressure
is extremely low.
• Cut-off and cut-on
pressures are too low
(well systems only).
• Reverse osmosis system
is in regenerative phase.
• Have someone turn up the cut-off and cut-
on pressure on the water pump
system (well systems only).
• It is normal for a reverse osmosis system to be
below 20 psi during the regenerative phase.
Water not
cold enough.
• The water dispensing system
is not designed to chill water.
• Add ice to cup or container before
dispensing water.
Loading ...
Loading ...
Loading ...