Loading ...
Loading ...
Loading ...
16
Before contacting the After Sales Service:
1. See if you can solve the problem yourself with
the help of the Troubleshooting guide.
2. Switch the appliance off and then on again to see
if the problem has been solved. If it has not,
switch off the appliance again and repeat the
operation after one hour.
3. If the problem persists after this course of
action, contact After-sales Service.
Specify:
• the nature of the fault,
• the appliance model,
• the Service number (the number after the word
SERVICE on the data plate at the side of the
crisper drawer),
• Your full address,
• Your telephone number and area code.
Note:
The direction of door opening can be
changed. If this operation is performed by
After-sales Service it is not covered by the
warranty.
AFTER-SALES SERVICE
• Install the appliance away from heat sources
(minimum distance: 30 cm from coal and
paraffin stoves, 3 cm from ovens and electric
cookers).
• Install the appliance in a dry, well-ventilated
place.
• Do not obstruct the appliance's air vents.
• Clean the inside (see relevant chapters).
• Fit the accessories supplied.
Electrical connection
• Electrical connections must be made in
accordance with local regulations.
• Voltage and power consumption are indicated
on the rating plate at the side of the crisper
drawer.
• Regulations require that the appliance be
earthed. The manufacturer declines all
liability for injury to persons or animals and
for damage to property resulting from
failure to observe the above procedures
and reminders.
• If the plug and socket are not of the same type,
have the socket replaced by a qualified
electrician.
• Do not use extension leads or adapters
Disconnecting the appliance
• It must be possible to disconnect the appliance
by unplugging it or by means of a two-pole
switch fitted upline of the socket.
INSTALLATION
Loading ...