Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
69
Installing the wine conditioning
unit
Before installing the wine condition-
ing unit
Take any accessories out of the appli-
ance.
Remove the cable clip from the back
of the appliance (depending on
model).
Risk of damage and injury from
the wine conditioning unit tipping
over.
There is an increased risk of injury
and damage if the wine conditioning
unit is installed by a single person.
Two people are required for installing
the wine conditioning unit.
Install the wine conditioning unit in a
stable, solid housing unit, positioned
on an even and level floor.
The building-in niche must be hori-
zontally and vertically aligned.
The required ventilation gaps must be
provided (see “Ventilation” and “In-
stallation dimensions” under “Installa-
tion”).
To install the wine conditioning unit,
you will need the following tools:
- A selection of screwdrivers
- a spirit level
- a tape measure
The following installation parts are
required:
- Ventilation grilles
- Air filter
- Foam block for air filtration in the
appliance plinth
- Screws to secure the appliance in
the niche
- Wrench to adjust height in the
niche
Loading ...
Loading ...
Loading ...