Loading ...
Loading ...
Loading ...
15
EN
Care & Cleaning
Soak filter
for 5 min
Ensure parts are
connected
Install filter in tank
Install water tankSet current month
1
Replace filter after
90 days or after 40L
!
22 3
54
of scale build-up in and on many of the inner
functioning components. Replacing the water
need to descale the machine.
The limitation of 40L is based on water hardness
level 4. If you are in level 2 area, you can increase
this to 60L.
WARNING
After regular use, hard water can cause mineral
build up in and on many of the inner functioning
temperature, power of the machine, and taste of
the espresso.
CLEANING CYCLE
The CLEAN ME light will illuminate when a
cleaning cycle is required. This is separate from
descaling.
1.
disc, followed by 1 cleaning tablet.
2.
3.
and the drip tray is empty.
4. Press the POWER button to switch the
5. Press the 1 CUP and 2 CUP buttons
simultaneously, then also press the POWER
button. Hold all 3 buttons together for
approximately 10 seconds.
6. The cleaning cycle will commence and last
for approximately 5 minutes. During this
cleaning disc is without a hole in the middle,
hardly any or no water should come through
7.
has completely dissolved. If the tablet has
not dissolved; repeat from step 4 of the
cleaning cycle until the tablet is dissolved.
8. Once the tablet has completely dissolved,
remove the cleaning disc, reinsert the
rinse the brew head. We recommend to
to avoid water splashing onto the machine.
splashes with a soft dry cloth.
DESCALING
NOTE
water tank before adding the descaling powder
when descaling the machine.
NOTE
The machine will not automatically prompt a
reminder when it is time to run a descaling
cycle. While the cleaning cycle is important for
the descaling cycle is essential to ensure that
the machine is kept clean on the inside and
free from mineral build-up.It is recommended
REPLACING THE WATER FILTER
Loading ...
Loading ...
Loading ...