Loading ...
Loading ...
Loading ...
90 - CLEANING AND MAINTENANCE 914779559/C
Special cleaning functions
• From position 0, turn the function knob to the
left by one position. The button flashes.
Vapor Clean (on some models only)
Preliminary operations
Before starting the Vapo r Clean:
• Remove all accessories from inside the oven
cavity.
• Remove the temperature probe (where
fitted).
• Remove the self-cleaning panels (where
fitted).
• Close the door.
• During the assisted cleaning cycle, wash the
self-cleaning panels (where fitted), which
were previously removed, separately in
warm water and a small amount of
detergent.
Vapor Clean cycle setting
1. After entering the special functions menu,
press the button until the
function is selected.
2. Press the button to confirm.
3. Fill the tank with clean water until the full
load indicator light displays.
4. At the end, remove the funnel and place the
loading drawer back in its place.
The words and the button
flash to indicate that the function can be started.
5.
6. Press the button to start the function.
See General safety instructions.
The Vapor Clean function is an assisted
cleaning procedure which facilitates the
removal of dirt. Thanks to this process, it
is possible to clean the inside of the
oven very easily. The dirt residues are
softened by the heat and water vapour
for easier removal afterwards.
If the indoor temperature is higher than
expected, the function is not activated
and every time the button is
pressed the appliance makes a beep.
Let the appliance cool down before
activating the function.
The duration and temperature
parameters cannot be changed by the
user.
Loading ...
Loading ...
Loading ...