Jenn-Air JDB8000AWS2 24 Inch Built In Undercounter Dishwasher

USER INSTRUCTIONS - Page 10

For JDB8000AWS2.

PDF File Manual, 65 pages, Read Online | Download pdf file

JDB8000AWS2 photo
Loading ...
Loading ...
Loading ...
OPTIONS
! 4 Hour
De ay
Control Lock
l ControlI
I Lock I
Hold 3 Sec
or
Control lock - 3 Sec
Runs the dishwasher at a
later time or during off-
peak electrical hours.
Select a wash cycle and
options. Press 4 HOUR
DELAY. Press START/
RESUME. Close the door
firmly.
NOTE= Anytime the door is
opened (such as, to add a
dish), the Start/Resume
button must be pressed
again to resume the delay
countdown.
CAN BE
SELECTED WITH
Available with
any cycle
WHAT IT DOES
Delays the start of a
cycle up to 4 hours.
ADDED TIME TO CYCLE
TYPICAL MAX
240 240
ADDED
WATER
GALLONS
(LITER_
0
Avoids unintended use of the dishwasher between cycles, or cycle and option changes during a cycle.
To turn on Lock, press and hold CONTROL LOCK or 4 HOUR DELAY (depending on model) for 3 seconds. The Control
Lock light will stay on for a short time, indicating that it is activated, and all buttons are disabled. If you press any button
while your dishwasher is locked, the light flashes 3 times. The dishwasher door can still be opened/closed while the
controls are locked.
To turn off Lock, press and hold CONTROL LOCK or 4 HOUR DELAY (depending on model) for 3 seconds. The light
turns off.
NOTE: If your model requires you to press and hold 4 Hour Delay to lock the controls, the Control Locked LED will be
on or off to indicate if the Control Lock is active or not.
CONTROL PURPOSE COMMENTS
To start or iesume a !f the do0r is opened during a cYcle oi powei is interrupted, the start/Resume indicator
wash cyc!e flashes: Press START/RESUME and pUSh the d0or firm!y €!ose d wi!hin 3 seconds.
L ...... _ NOTE" If the door is not closed within 3 seconds, the StartJResume indicator will flash; an
Repeat Last Cycle
audible tone wil! be heard, and the cYCle will not start,
To reset any cycle or
I Cancel/ I options during
| _ selection.
To cancel a wash
cycle after it's
started.
Press CANCEL/DRAIN to reset any control selections made.
See "Canceling A Cycle" and "Changing a Cycle After Dishwasher Is Started" sections.
To turn the audible Press and hold the super scrub button for3 Seconds tO turn the audible tones on or off.
| _ tones on croft. On!y audible tones for confirming button presses can be turned on/off, Important audible
tones, such as indicating a cycle has been interrupted, cannot be deactivated.
Sound On/Off - 3 Sec
10
Loading ...
Loading ...
Loading ...