Loading ...
Loading ...
Loading ...
3. Base
Panel
Oncetheinsidesurfacesnapsinplace,
continuetheprocessbyrollingthehandle
clipslightlyoutwardandpressingdown
firmlytosnapontotheoutsidesurface.If
installedincorrectly,thehandleclipwillnot
layfiat.
_nel
Screws
HingeScrews
Door Removal (upright models)
If door must be removed, unplug the unit,
1. Gently lay the unit on its back, on a rug
or blanket.
2. Remove 2 base screws and base panel.
3. Remove wire from clips on bottom of
cabinet if required.
4. Unplug connector, if required, by holding
the cabinet connector in place, and pulling
door connector out.
5. Remove bottom hinge screws.
6. Remove plastic top hinge cover.
7. Remove screws from top hinge.
8. Remove top hinge from cabinet.
9. Remove door and bottom hinge
from cabinet.
10. To replace door, reverse the above order
and securely tighten all screws to prevent
hinge slippage.
r Connector
Connector
Lid Removal (chestmodels)
See Instructions on hinge label. Unplug the unit.
Loading ...
Loading ...
Loading ...